Hustler Dash XD Parts (940767 48" Dash XD Kawasaki FR600) 2020-2025
All Hustler Parts Diagrams |
Welcome to the Hustler Dash XD parts lookup page. All parts are OEM replacement parts from the Hustler Turf Warehouse. This section is for all Hustler Dash XD 940767 models.
All parts listed below are available and ship same day if in stock. If the parts are not in stock, lead time is 2-5 days. If you have any questions or would like help with parts lookup, give us a call and we will be happy to help!
410-692-5170
Section 1: Quick List: Replacement Parts List
| Item | Part Number | Description | Qty Needed |
| 1 | 604240 | AIR FILTER, KAW W/CLAMP | 1 |
| 2 | 602581 | ENGINE OIL FILTER | 1 |
| 3 | 068478 | FUEL FILTER - IN LINE | 1 |
| 4 | 604323 | VAPOR SYSTEM FILTER | 1 |
| 5 | 607558 | BLADE, 16.50"-L-F-CW | 3 |
| 6 | 796623 | BLADE, 16.50"-MUL-F-CW | 3 |
| 7 | 608219 | BELT, DECK | 1 |
| 8 | 606997 | DRIVE BELT | 1 |
| 9 | 776476 | SWITCH, PTO 6201-321 | 1 |
| 10 | 045898 | IGNITION SWITCH | 1 |
| 11 | 793315 | SWITCH, SNAP MOUNT | 1 |
| 12 | 606445 | STARTER SOLENOID | 1 |
| 13 | 607145 | DISCHARGE CHUTE | 1 |
| 14 | 607146 | CHUTE SPRING | 1 |
| 15 | 605867 | PULLEY COVER, UNIVERSAL | 2 |
| 16 | 601963 | PIN, DECK HEIGHT STOP | 1 |
| 17 | 785808 | KEY ASSEMBLY | 1 |
| 18 | 607731 | CAP - 2.25" KELCH | 1 |
| 19 | 607723 | BATTERY, AGM 12V 9AMH | 1 |
| 20 | 606531 | FUEL STABILIZER, CASE | 1 |
| 21 | 608841X | OIL, CASE QTS 15W-50 ENG | 1 |
Section 2: Frame, Fenders, Instrument Panel, Engine Guard & Battery
| Item | Part Number | Description | Qty Needed |
| 1 | 555894 | SVC, FRAME | 1 |
| 2 | 601967 | DECAL, ENGINE COMPART | 1 |
| 3 | 602041 | DECAL, HOT | 1 |
| 4 | 608090 | DECAL, DASH XD | 1 |
| 5 | 607782 | DECAL, DBA 115 ISO | 1 |
| 6 | N/A | SERIAL NUMBER / SPEC DECAL | 3 |
| 7 | 601981 | DECAL, SAFE OPERATE-GRAY | 1 |
| 8 | 608127 | DECAL, USA, F&D | 1 |
| 9 | 600899 | DECAL, PUMP BELT WARNING | 1 |
| 10 | 608330 | DECAL, DECK HEIGHT | 1 |
1. Serial number decal. In the event the serial number decal becomes damaged or illegible, please contact your dealer to order a replacement.
2. Patent numbers decal.
3. EPA compliance decal.
4. The frame includes the decals.
| Item | Part Number | Description | Qty Needed |
| 1 | 608276 | CABLE ASM - CHOKE | 1 |
| 2 | 776476 | SWITCH, PTO 6201-321 | 1 |
| 3 | 785808 | KEY ASSEMBLY | 1 |
| 4 | 045898 | IGNITION SWITCH | 1 |
| 5 | 605473 | CS .250-20X0.75 BH TX BZ | 14 |
| 6 | 605628 | FW 0.281X.63X.07 ZB | 14 |
| 7 | 554826 | SVC, INST PANEL | 1 |
| 8 | 607065 | DECAL, INSTRUMENT PANEL | 1 |
| 9 | 606851 | CS 10-24X .500 PH SH ZN | 2 |
| 10 | 607063 | FENDER RH | 1 |
| 11 | 554827 | SVC, STEERING PLATE R | 1 |
| 12 | 785220 | DECAL, STEERING R.S. | 1 |
| 13 | 608275 | CABLE ASM - THROTTLE | 1 |
| 14 | 601982 | CN .250-20X .150 MAX THK | 18 |
| 15 | 605782 | DECAL, LEVEL FUEL BLOWM | 1 |
| 16 | 785139 | DECAL, STEERING L.S. | 1 |
| 17 | 608195 | FENDER, LH | 1 |
| 18 | 554829 | SVC, FOOTREST | 1 |
| 19 | 602407 | DECAL, HUSTLER ID | 1 |
| 20 | 055939 | CS .250-20X0.75 HX G5 ZN | 4 |
| 21 | 768515 | FW 0.281SAE | 4 |
| 22 | 606445 | STARTER SOLENOID | 1 |
| 23 | 601319 | POS. BATTERY CABLE BOOT | 1 |
| 24 | 768523 | FW 0.343SAE | 2 |
| 25 | 041152 | NT .312-24 HX G8 | 2 |
| 26 | 000331 | WIRE TIE, SMALL/SHORT | 1 |
| 27 | 601400 | GM .63 x1.13 x.88 x .13 | 1 |
| 28 | 043570 | CLIP - HOSE - SINGLE(FS) | 1 |
| 29 | 608239 | WIRE HARNESS | 1 |
| 30 | 555895 | SVC, STEERING PLATE L | 1 |
1. Part of the wire harness.
2. Part of the Engine Guard Install.
| Item | Part Number | Description | Qty Needed |
| 1 |
126971-6 |
ENGINE GUARD STRAP | 3 |
| 2 | 016832 | NT .312-18FLKG5 | 6 |
| 3 |
127419-6 |
GUARD - MUFFLER | 1 |
| 4 | 555896 | SVC, ENGINE GUARD | 1 |
| 5 | 037887 | CB .312-18X 1.000 FUL ZN | 6 |
| 6 | 608311 | DECAL, H | 1 |
| 7 | 608312 | DECAL, HUSTLER | 1 |
1. The engine guard includes the decals.
| Item | Part Number | Description | Qty Needed |
| 1 | 055939 | CS .250-20X0.75 HX G5 ZN | 2 |
| 2 | 768515 | FW 0.281SAE | 2 |
| 3 |
608018-3 |
BATTERY HOLD DOWN | 1 |
| 4 | 713198P | SEAL 3/8x3/4 - 6 FT | 1.5" |
| 5 | 601319 | POS. BATTERY CABLE BOOT | 1 |
| 6 | 024927 | NT .250-20HXG5 | 2 |
| 7 | 055947 | CS .250-20X0.50 HX G5 ZN | 2 |
| 8 | 601982 | CN .250-20X .150 MAX THK | 2 |
| 9 | 607723 | BATTERY, AGM 12V 9AMH | 1 |
1. When performing service on the mower, disconnect the negative battery cable (black) and do not reconnect it to the battery until ready to start the
engine.
Section 3: Transmissions, Steering & Brake
| Item | Part Number | Description | Qty Needed |
| 1 | 016410 | CS .375-16X2.000HXG5 | 1 |
| 2 | 043067 | CS .312-18X3.000HXG5 | 4 |
| 3 | 768523 | FW 0.343SAE | 24 |
| 4 | 606997 | DRIVE BELT | 1 |
| 5 | 080655 | CS .375-16X1.500HXG5 | 1 |
| 6 | 076422 | FW 0.406X1.00X.06 ZN | 2 |
| 7 | 607163 | PULLEY, 3" FLAT POLY | 1 |
| 8 | 124545-4 | TENSIONER ARM | 1 |
| 9 | 607201 | SPRING, EXTENSION | 1 |
| 10 | 712893 | FW 0.406X1.25X.12 HD ZN | 1 |
| 11 | 054502 | NT .375-16HXG5 | 1 |
| 12 | 086660 | NT .375-16NLG8 | 2 |
| 13 | 606994 | TRANSMISSION, ZT1800 | 1 |
| 14 | 606995 | TRANSMISSION, ZT1800 | 1 |
| 15 | 125017-1 | LINK | 2 |
| 16 | 058776 | NT .312-18NLG5 | 14 |
| 17 | 037887 | CB .312-18X 1.000 FUL ZN | 4 |
| 18 | 050161 | CS .312-18X1.750HXG5 | 6 |
| 19 | 126968-1 | TRANSMISSION BRACE | 1 |
| 20 | 016253 | CB .312-18X .750 FUL ZN | 2 |
| 21 | 127080-1 | ANCHOR - CLUTCH | 1 |
| 22 | 016832 | NT .312-18FLKG5 | 2 |
| 23 | 126969-1 | TRANSMISSION BRACE | 1 |
| 24 | 126967-1 | TRANSMISSION BRACE | 1 |
1. Torque to 17 ft-lbs.
2. Tighten the nut, but make sure the tensioner arm still pivots freely.
3. Right side transmission.
4. Left side transmission.
| Item | Part Number | Description | Qty Needed |
| 1 | 607128 | KIT, FAN PULLEY | 1 |
| 2 | 607727 | FAN - 7.0" (10 BLADE) | 1 |
| 3 | 607131 | BREATHER ASSY | 1 |
| 4 | 607129 | KIT, RTN | 1 |
| 5 | 607130 | RTN SPRING | 1 |
| 6 | 608515 | KIT - SEAL, ZT1800 | 1 |
| Item | Part Number | Description | Qty Needed |
| 1 | 607069 | STEERING BAR W/A | 2 |
| -- | 781260 | GRIP, STEERING BAR | 2 |
| 2 | 767954 | FW 0.379X.82X.06 HD ZN | 12 |
| 3 | 036244 | CS .375-16X1.00 HX G5 ZN | 4 |
| 4 | 607073-4 | STEERING LEVER W/A | 2 |
| 5 | 056036 | CS .375-16X2.250HXG5 | 2 |
| 6 | 606575 | CLIP, SAFETY | 2 |
| 7 | 607686 | STEERING ROD S/A | 2 |
| 8 | 124628-3 | STEERING LINK | 2 |
| 9 | 086660 | NT .375-16NLG8 | 4 |
| 10 | 607077 | STEERING BLOCK A | 2 |
| 11 | 607076 | STEERING BLOCK B | 2 |
| 12 | 058776 | NT .312-18NLG5 | 12 |
| 13 | 768523 | FW 0.343SAE | 16 |
| 14 | 125240-3 | BRAKE LINK LH | 1 |
| 15 | 604179 | BRAKE LINK | 2 |
| 16 | 607078 | STEERING BUSHING | 4 |
| 17 | 016253 | CB .312-18X .750 FUL ZN | 8 |
| 18 | 126353-1 | BRAKE CABLE BRACKET | 1 |
| 19 | 016444 | CS .375-16X3.000HXG5 | 2 |
| 20 | 554831 | SVC, STEERING BRACKET R | 1 |
| 21 | 793315 | SWITCH, SNAP MOUNT | 2 |
| 22 | 608017 | FW .580X.875X.06 NYLON | 4 |
| 23 | 125241-3 | BRAKE LINK RH | 1 |
| 24 | 608016 | SPACER, BRAKE BRACKET | 2 |
| 25 | 607359 | BRAKE CABLE | 2 |
| 26 | 554832 | SVC, STEERING BRACKET L | 1 |
| 27 | 808493 | RIVET NUT, 3/8-16 THREA | 2 |
| 28 | 706168 | NT .375-16JAMG5 | 2 |
| 29 | 604365 | CS .375-12X1.50 HX G5 ZN | 2 |
| 30 | 023655 | NT 0.312-24 NL G8 | 2 |
1. Torque to 14 ft-lbs.
2. Torque to 11 ft-lbs and loosen 45 degrees.
3. The steering brackets include the rivet nuts.
Section 4: Wheels & Tires
| Item | Part Number | Description | Qty Needed |
| 1 | 609062 | TIR/WHL 18X8.50-8 BLK | 2 |
| 2 | 608614 | FW .750X1.000X.063 RBBR | 2 |
| 3 | 712927 | FW 0.344X1.00X.12 HD ZN | 2 |
| 4 | 606989 | CS .312-24 X .750 HX G5 | 2 |
| 5 | 705954 | CS .500-13X1.25 HX G5 ZN | 2 |
| 6 | 344267 | FW .510X2.15X.19 ZN | 2 |
| 7 | 712976 | FW 0.531X1.38X.12 ZN | 2 |
| 8 | 784223 | BEARING | 4 |
| 9 | 784603 | SPACER | 2 |
| 10 | -- | REFER TO "FRONT WHEEL ASSEMBLY" | 2 |
1. Torque to 17 ft-lbs.
| Item | Part Number | Description | Qty Needed |
| 1 | 110116 | CASTER FORK W/A | 1 |
| 2 | 604718 | CS .500-13X6.00 HX G5 ZN | 1 |
| 3 | 767962 | FW .531 x 1.063 x .175 | 2 |
| 4 | 707398 | NT .500-13 JAM NY LK | 1 |
| 5 | 607297 | TIR/WHL 11X4.00-5 BLK | 1 |
1. Tighten, then back off the nut until the wheel spins freely.
| Item | Part Number | Description | Qty Needed |
| 1 | 607026 | BEARING, BALL SEALED | 2 |
| 2 | 019521 | TIRE VALVE TR-412 GOODY | 1 |
1. Refer to the General Service Manual for wheel bearing service procedures.
| Item | Part Number | Description | Qty Needed |
| 1 | 607795 | 18X8.50-8 B2R BIG BITE TIRE | 1 |
| -- | 609063 | TIR 18X8.50-8 B4R LM | 1 |
| 2 | 607844 | WHL 8X7.00 0X0.0 BLK | 1 |
| 3 | 019521 | TIRE VALVE TR-412 GOODY | 1 |
Section 5: Engine, Muffler, Clutch & Fuel System
| Item | Part Number | Description | Qty Needed |
| 1 | -- | ENGINE, KAW FR541V | 1 |
| 2 | 604463P | HOSE, OIL DRAIN - 1 FT | 1 |
| 3 | 607853 | MUFFLER | 1 |
| 4 | 601400 | GM .63 x1.13 x.88 x .13 | 1 |
| 5 | 767954 | FW 0.379X.82X.06 HD ZN | 4 |
| 6 | 602580 | CS .375-16X1.25HXG8FTZN | 4 |
| 7 | 608015 | PULLEY - ENGINE | 1 |
| 8 | 712372 | KEY 1/4 SQ X 0.66 LG(FS) | 1 |
| 9 | 605827K | S/C TO 127340 | 1 |
| -- | 127340 | KIT - CLUTCH | 1 |
| 10 | 605595 | BUSHING, CLUTCH | 1 |
| 11 | 602680 | FW .453X1.12X.12 HRD ZN | 1 |
| 12 | 785659 | CS .437-20X2.50 HXG5ZN | 1 |
| 13 | 029876 | LW .312 INTEXT ZN | 1 |
| 14 | 720516 | CS M8-1.25X16HX FL10.9 | 1 |
| 15 | 000323 | CLIP, HOSE CLAMP | 2 |
| 16 | 603326P | VAPOR LINE, 3/16" - 7 FT | 1 |
| 17 | 000331 | WIRE TIE, SMALL/SHORT | 4 |
| 18 | 015818P | FUEL LINE, 1/4" - 6 FT | 1 |
| 19 | 604281 | TEE, 3/16" PLASTIC | 1 |
| 20 | 604292 | BOOT, 3/16" TO 1/4" BARB | 1 |
| 21 | 604323 | VAPOR SYSTEM FILTER | 1 |
1. Supplied with the engine.
2. Torque to 45–48 ft-lbs. Replace (do not reuse) the cap screw if it is removed or loosened. Use only hand tools to install this fastener.
3. Torque to 30–35 ft-lbs. Replace (do not reuse) the cap screw if it is removed or loosened. Use only hand tools to install this fastener.
4. Torque to 17 ft-lbs.
5. Part of the wire harness.
FUEL & VAPOR LINE LENGTHS
A: 18" TANK TO FUEL FILTER (FUEL)
B: 19" TANK TO TEE (VAPOR)
C: 26" TEE TO ENGINE (VAPOR)
| Item | Part Number | Description | Qty Needed |
| 1 |
604240 |
AIR FILTER, KAW W/CLAMP | 1 |
| 2 | 602581 | ENGINE OIL FILTER | 1 |
| 3 | 068478 | FUEL FILTER - IN LINE | 1 |
| 4 | 604350 | VALVE, OIL DRAIN | 1 |
| Item | Part Number | Description | Qty Needed |
| 1 | 608040P | RUBBER STRIP - 7 FT | 1 |
| 2 | 604966 | TRIM LOCK, 1.13" | 2 |
| 3 | 127226-1 | SUPPORT - FUEL TANK | 1 |
| 4 | 607925 | FUEL TANK ASM | 1 |
| 5 | 000430 | WIRE TIE, SMALL/LONG | 1 |
| 6 | 127225-1 | STRAP - FUEL TANK | 2 |
| 7 | 713198P | SEAL 3/8x3/4 - 6 FT | 1 |
| 8 | 055939 | CS .250-20X0.75 HX G5 ZN | 2 |
| 9 | 768515 | FW 0.281SAE | 2 |
| 10 | 000331 | WIRE TIE, SMALL/SHORT | 2 |
| 11 | 037887 | CB .312-18X 1.000 FUL ZN | 2 |
| 12 | 127224-1 | SUPPORT - FUEL TANK | 1 |
| 13 | 601982 | CN .250-20X .150 MAX THK | 2 |
| 14 | 768523 | FW 0.343SAE | 2 |
| 15 | 058776 | NT .312-18NLG5 | 2 |
| 16 | 607731 | CAP - 2.25" KELCH | 1 |
| 17 | 605473 | CS .250-20X0.75 BH TX BZ | 2 |
| 18 | 605628 | FW 0.281X.63X.07 ZB | 4 |
| 19 | 068551 | NT .250-20 HXZY NL | 2 |
RUBBER STRIP LENGTH
A: 4"
SEAL LENGTH
B: 13.5
| Item | Part Number | Description | Qty Needed |
| -- | 607925 | FUEL TANK ASM | 1 |
| 1 | 604200K | GROMMET SVC KIT | 2 |
| 2 | 604287K | VENT FITTING SVC KIT | 1 |
| 3 | 127341 | KIT - FUEL PICKUP | 1 |
Section 6: Deck, Deck Pulleys, Spindles, Deck Belt, Blades & Deck Lift
| Item | Part Number | Description | Qty Needed |
| 1 | 605867 | PULLEY COVER, UNIVERSAL | 2 |
| 2 | 604324 | CS .250-20 X .75 HX FLG | 4 |
| 3 | 608219 | BELT, DECK | 1 |
| 4 | 607145 | DISCHARGE CHUTE | 1 |
| 5 | 607146 | CHUTE SPRING | 1 |
| 6 | 607157 | PIN, DISCHARGE CHUTE | 1 |
| 7 | 607093 | CP, RUE RING .054 X .392 | 1 |
| 8 | 607051 | CP, RUE RING .062 X .520 | 4 |
| 9 | 004168 | FW .531x1.00x.090 ZN | 4 |
| 10 | 608584-4 | PULLER, DECK W/A | 2 |
| 11 | 781567 | NT .500-13NLG5 | 2 |
| 12 | 767962 | FW .531 x 1.063 x .175 | 2 |
| 13 | 788166 | WHEEL ASSY, ANTI SCALP | 2 |
| 14 | 607558 | BLADE, 16.50"-L-F-CW | 3 |
| -- | 607558X | 10PK, BLADE 16.50" | 1 |
| -- | 796623 | BLADE, 16.50"-MUL-F-CW | 3 |
| -- | 796623X | 10PK BLADE, 16.50"-MUL-F | 1 |
| -- | 796631 | BLADE, 16.50"-GAT-F-CW | 3 |
| -- | 796631X | 10PK BLADE, 16.50"-GAT-F | 1 |
| -- | 606252 | BLADE, 16.5"-H-F-CW | 3 |
| -- | 606252X | 10PK BLADE 16.50"-H-F-CW | 1 |
| 15 | 602680 | FW .453X1.12X.12 HRD ZN | 3 |
| 16 | 754101 | CS .437-20X1.250HXG5 | 3 |
1. Torque to 48 ft-lbs.
2. Torque to 2–5 ft-lbs on these 2 self-tapping screws.
| Item | Part Number | Description | Qty Needed |
| 1 | 781567 | NT .500-13NLG5 | 3 |
| 2 | 125847-4 | BELT GUIDE, 4.00" IDLER | 1 |
| 3 | 607428 | FW 0.531 X 0.90 X 0.134 | 1 |
| 4 | 605467 | DUST SHIELD | 3 |
| 5 | 605512 | 4" IDLER PULLEY | 1 |
| 6 | 604251 | NT .312-18 HXNL JAM G2ZN | 4 |
| 7 | 768523 | FW 0.343SAE | 20 |
| 8 | 604079 | IDLER SLIDE, EXTRUDED | 2 |
| 9 | 604110 | ANCHOR, SPRING TENSIONER | 2 |
| 10 | 605379 | SPRING, EXTENSION | 1 |
| 11 | 604194 | SLED, IDLER | 1 |
| 12 | 604253 | CB .50-13 X 2.00 STD ZN | 1 |
| 13 | 606943 | NT .562-18 HX NLG5 | 3 |
| 14 | 605443 | DRIVE PULLEY | 3 |
| 15 | 604123 | SPACER, PULLEY | 3 |
| 16 | 036236 | CS .312-18X1.000HXG5 | 12 |
| 17 | 058776 | NT .312-18NLG5 | 4 |
| 18 | 604486 | FW .531X.812X.089 HD | 2 |
| 19 | 083147 | CB .312-18X .620 G5 ZN | 8 |
| 20 | 607479 | IDLER PULLEY, 5.00" | 1 |
| 21 | 605508 | FW .73X2.25X.31 ZN | 2 |
| 22 | 607480 | IDLER PULLEY, 4.00" | 1 |
| 23 | 604214 | SPINDLE ASSY, RAP/ALP | 3 |
| 24 | 604254 | CB .50-13 X 2.50 STD ZN | 2 |
1. Torque to 18 ft-lbs.
2. Torque to 75 ft-lbs.
3. Torque to 73 ft-lbs.
4. Torque to 30 ft-lbs. The idler arm must pivot freely.
| Item | Part Number | Description | Qty Needed |
| -- | 604214 | SPINDLE ASSY, RAP/ALP | 1 |
| 1 | 604019 | BEARING, SPINDLE | 1 |
| 2 | 604218 | CAST HOUSING | 1 |
| 3 | 607274 | SVC SHAFT RPT SPINDLE | 1 |
| Item | Part Number | Description | Qty Needed |
| 1 | 601963 | PIN, DECK HEIGHT STOP | 1 |
| 2 | 125228-1 | DECK LIFT BRACKET | 1 |
| 3 | 037887 | CB .312-18X 1.000 FUL ZN | 10 |
| 4 | 058776 | NT .312-18NLG5 | 10 |
| 5 | 768523 | FW 0.343SAE | 14 |
| 6 | 125229-1 | DECK LIFT BRACKET | 1 |
| 7 | 126103-1 | DECK LIFT W/A, REAR | 1 |
| 8 | 124635-3 | DECK LIFT STRAP | 4 |
| 9 | 126102-1 | DECK LIFT W/A, FRONT | 1 |
| 10 | 086660 | NT .375-16NLG8 | 6 |
| 11 | 767954 | FW 0.379X.82X.06 HD ZN | 6 |
| 12 | 605114 | FW .41X.94X.25 UHMW | 4 |
| 13 | 025395 | CB .375-16X 1.00 G5 ZN | 2 |
| 14 | 791673 | CLIP E,.625x.480x.042 Z | 8 |
| 15 | 118018 | PIVOT, DECK LIFT | 4 |
| 16 | 608334 | DECK HANGER | 4 |
| 17 | 125233-4 | DECK LIFT LINK | 1 |
| 18 | 601839 | PIVOT SPACER BUSHING | 2 |
| 19 | 607093 | CP, RUE RING .054 X .392 | 4 |
1. Part of the Deck Assembly.
| Item | Part Number | Description | Qty Needed |
| 1 |
555594 |
SVC, DECK DECAL 48" | 1 |
| 2 | 604221 | DECAL, DANGER / CHUTE | 1 |
| 3 | 781419 | DECAL, BELT ROUTING | 1 |
| 4 | 604222 | DECAL, DANGER / OBJECTS | 1 |
| 5 | 793976 | DECAL,48"DECK ID | 1 |
1. The frame includes the decals.
Section 7: Seat
| Item | Part Number | Description | Qty Needed |
| 1 | 608053 | SEAT, SK120 | 1 |
| 2 | 554825 | SVC, SEAT PAN | 1 |
| 3 | 768523 | FW 0.343SAE | 6 |
| 4 | 036236 | CS .312-18X1.000HXG5 | 4 |
| 5 | 086660 | NT .375-16NLG8 | 2 |
| 6 | 767954 | FW 0.379X.82X.06 HD ZN | 4 |
| 7 | 601815 | DECAL, BATTERY WARNINGS | 1 |
| 8 | 016253 | CB .312-18X .750 FUL ZN | 2 |
| 9 | 607838 | CAP | 2 |
| 10 | 029751 | CS .375-16X1.00 HXF G5ZN | 2 |
| 11 | 793851 | SPRING,COMP 1.25X4.00X. | 2 |
| 12 | 124617-1 | SEAT SUPPORT | 1 |
| 13 | 058776 | NT .312-18NLG5 | 2 |
| 14 | 036244 | CS .375-16X1.00 HX G5 ZN | 2 |
| 15 | 016899 | NT .375-16 FLKG5 | 2 |
| 16 | 793315 | SWITCH, SNAP MOUNT | 1 |
1. Torque to 7 ft-lbs.
2. Do not torque; the seat pan and seat stop must pivot freely
If you need help finding parts for your equipment give us a call during business hours and one of our experts will be happy to assist you.